Changshu smoothly for plastic products factory about plastic plate quality inspection standards

The plastic sheet extrusion is finding wider and wider application in the field of industry, for plastic plate quality inspection standards is Paramount, the following works of plastic products factory in changshu said plastic board for quality inspection standards.

(1) to ensure project:

1. Extruded plate, mesh cloth, specifications and technical indexes of polymer mortar configuration of raw material quality must conform to the requirements.

　　2. Extruded board must with metope stickup and firm, no loosening and virtual sticky.

　　3. Polymer mortar paste and extruded board must be closely, no delaminating, empty drum, surface blasting ash and cracks. Basic project:

2.

1. Each extruded board with the paste area of 30 grass-roots & ndash; 50%

　　2. Fixed a bulge part into the structure of the wall not less than 50.

　　3. Meet extruded plate seam is not adhesive.

　　4. Should be horizontal grid cloth shop is stuck, pressure glue is close-grained, not free drum, folds, become warped edge, the leakage phenomenon, horizontal lap width is not less than 100, vertical lap width not less than 80.

　　5. The thickness of the polymer mortar should not be greater than 4, the first layer is not more than 5.