Changshu da plastic products factory negotiations smoothly broken plastic extrusion mould quality three methods

The use of plastic injection mould is also very common, if is in use, the quality of plastic extrusion die didn't notice when the choice, will seriously affect the normal use of plastic injection mould, get a good use in order to make the mold, the smooth da plastic products factory in changshu negotiating plastic extrusion mould quality stand or fall of three methods.



a, look at the thickness of the plastic injection mould, although the use of mold does not need too strong or other bad environment, but because the reverse mould parting for many times, the mold is very easy to loss, deformation, destruction, and the fundamental approach to solve this problem is increasing the thickness of the mould, so the thickness can clearly distinguish the grade of the mould.



2, see if the specifications of the plastic extrusion die standards, good mould produced extrusion plastic product size can be controlled in the zero error of a few millimeters, and inferior mould tend to error produced products will reach a few millimeters or even a few centimeters.



3, check the material of plastic injection mould and to work and good mould should be inside and outside is very smooth, looks full of sheen, and micro embellish hand feel, inferior mould surface may have a burr or potholes, than is against both stand now.