Changshu smoothly da plastic products factory to talk about how to install ABS plastic tubing connection

1/7 of the ABS plastic pipes for steel than quantity to reduce the structure weight; Fluid resistance is small; Chemical performance is stable, sealed performance is good; ； Plastic tubing to reduce the consumption of raw materials, reduce the labor intensity of artificial, and greatly saves the project investment, convenient construction, good effect, fast curing speed, high bonding strength, avoids the general plastic tubing run risk of dripping phenomenon. Changshu da plastic products factory talk about how to install the connection smoothly below ABS plastic tubing.



1, before the opening of large diameter ABS material shall be made for the cutting limit, to ensure the level of the pipe cutting when the cutting mouth;



2, grinding tube, the outer wall of the kerf, external cylindrical grinding is an obtuse Angle. Large-diameter plastic pipe should be used for slope mouthparts groove, reducing socket thrust. When using the slope mouth should not be a forming, pushed along the circumference mouth 2 - over and over again 3 ring shape.



3, remove the pipe sundry, wipe with clean dry cotton cloth bonding surface clean.



4 trial plug, pipe and pipe fittings, and in accordance with the manufacturer recommends socket depth, completes the tag. When both inside and outside round tolerance, not too tight or too loose, should be replaced according to the actual construction situation pipe or tube.