Changshu smoothly to squeeze SuChang common solutions to problems about plastic pipe production line

Plastic pipe production line now choose such a line users than ever, but for many users, after the investment to choose such a line, in order to guarantee the investment after the normal operation and fault lifting scheme for different plastic pipe production line, want to know more, want to know the specific, when faced with these failures after can know how to use lifting scheme, let the equipment can normal operation. Changshu smoothly reach below crowded SuChang solutions for common problems in plastic pipe production line.



when plastic pipe production line in the inner surface of the trench, can check to see if the inner tube has been into the water, if there is a water, would be to just export mould tube embryo pinched, inner cavity closed, will reduce the internal temperature of the mold, so be solved through cleaning and polishing the mold.



pipeline internal jitter ring, to adjust the sizing set of water as soon as possible, to ensure uniform above the water, but also adjust the vacuum, after making room is slightly higher than the previous vacuum degree of vacuum, but also to check whether the vacuum seal is too close, see if there are any dithering phenomenon of tractors, check whether the host discharging evenly can be solved.



no vacuum plastic pipe production line fault, can check the vacuum pump inlet see if jams, if the congestion, can use a needle to dredge, also check vacuum pump work is normal, check the vacuum line have not leak, check the core mold screw in the middle hole is blocked, such as the jam, can use wire to dredge.



plastic pipe production line pipe outside the park size out-of-tolerance fault, can adjust the size of the vacuum degree, can change the size of the garden outside, by adjusting the traction speed, can change the size of modified sizing set of inner hole size, can be solved.