High quality plastic injection moulding machine
Introduction
Mould Size Diameter (mm): 12.7, 16, 19, 22, 25, 28, 30, 32, 35, 38, 50, 60 (Oval& round for choice)
1. This machine uses screw pre-plastication, mould closure all by all-hydraulic pressure, double-mould
alternative forming way. And the shoulders are smooth, beautiful and firm.
1. It is equipped with produced push-out device, this can put the tubes out of the mold automatically, ease worker’s intensity and increase the working efficiency.
Main Technical Parameters
Main technical Parameters | |||
Power Supply: | 3*380VAC/50HZ | Power of the machine: | 8kw |
Productivity: | 25-35pcs/min | Dimension: | 2600*1700*2800mm |
Weight: | 2000kg | Tube Diameter: | 11-60mm |
Specification | |||
Injection Unit | Description | Unit | SM-400T |
Screw diameter | mm | 36 | |
Max injection pressure | kg/cm2 | 1210 | |
Theoretical shot volume | cm3 | 122 | |
Mix shot weight(ps) | g(oz) | 113(4.0) | |
Injection rate | cm3/sec | 70 | |
Clamping Unit | Clamping force | ton | 40 |
Top laten size | mm | 550*395 | |
Shuttle platen size | mm | 390*820 | |
Shuttle stroke | mm | 420 | |
Mold size | mm | 410*255 | |
Min mold thickness | mm | 280/380 | |
Opening stroke | mm | 200 | |
Open daylight | mm | 480/580 | |
Ejector force | ton | 15 | |
Ejector stroke | mm | 55 | |
Others | Hydraulic system pressure | kg/cm2 | 140 |
Oil tank volume | L | 210 | |
Electric power | hp(kw) | 7.5(5.5) | |
Barel heating power | kw | 3.6 | |
Total wattage | kw | 9.1 | |
Machine dimension(approx) | m | 1.8*1.5*2.5 | |
Machine weight(approx) | t | 2 |
Changshu Shunlida Plastic Product Factory
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist