Better Touch Better Business
Contact Sales at CSSSLD.
Well type nozzle
by：CSSSLD
2021-02-03
The characteristics of the internal heating type hot runner is in the nozzle and the mold flow injection tooling has been provided with a heater.
Compared with the internal and external heater, due to the heater is installed in the central position of the flow channel, the plastic melt in the runner can prevent heater directly to bypass but or template heat dissipation, so the heat loss is small, but the disadvantage is that the plastic is easy to produce local overheating.
For plastic injection molding melt viscosity is very low, to avoid gate wiredrawing phenomenon, can use gate valve type hot runner.
multi-cavity adiabatic flow channel is also called adiabatic distributary channel, direct gate type and main point gate type two kinds. In order to make the flow of internal plastic melt adiabatic effect, the cross section shape use circular and designed to be more considerable. The general 16 and distributary channel diameter Within 32 mm, molding cycle long take larger value, instead of small value, the biggest can reach more than 70 mm. On the mold design, general would add a shunt but. In order to reduce shunt but on the mold cavity part of the heat transfer area, the shunt but in contact with the cavity plate fixed model to open a few grooves.
heat flow but the hole is drilled, insert hole tubular heater, make the flow passage of the plastic in the process of work always stay molten state. Heat flow but use of insulation materials or use of the rest of the air gap and mold heat insulation. External heating type multi-cavity heat flow can be divided into the mainstream type and point gate mouth two kinds, is the point that are widely used in the water the mouth. In order to prevent curing gate in injection molding production, must be insulated gate parts.
heat flow refers to the port within or near the port of set up the heater, using the method of heating injection molding machine between the nozzle and sprue gating system in high temperature condition, let the gating system of plastic has been in the molten state in molding process, ensure the smooth process of injection molding. Heat runner injection mold as adiabatic passage before use or not use must be removed after coagulation in distributary channel, only the gating system heating before driving to the regulation of temperature, condensation in distributary channel will melt, injection molding work can begin. Heating runner gating system in the form of many, generally can be divided into single cavity heating runner and cavity heat flow.
extended nozzle is one of the most Jane single cavity heating passage, it is the common injection molding machine nozzle extension after direct contact with mold gate on the part of a nozzle, the nozzle itself is equipped with heaters, point gate feeding cavity used. In order to avoid the nozzle of too much heat to the low temperature of cavity template, make temperature is difficult to control, effective heat insulation measures should be taken, the commonly used method with a plastic insulation and air adiabatic method.
well type nozzle is one of the most simple adiabatic flow channel, also known as adiabatic mainstream way, suitable for single cavity mould. This form of adiabatic passage between the entrance of the injection molding machine nozzle and mould with a sprue cup, cup outside the air-gap adiabatic, cup with cross section larger storage materials well. In the process of injection molding processing, contact with the wall of the melt quickly solidify and form a thermal barrier, make keep good flow state is located in the center of the melt through point gate mold filling.
according to the distribution of different heating method, multi-cavity heat flow can be divided into external heating and inner heating type. External heating type multi-cavity injection mold has a common characteristic of the heat flow path, namely the mould must be equipped with a heated by heater heat flow but, in the form of heat flow but according to the number of cavity and arrangement, can be a rectangle, or X. Mainstream way and distributary channel cross section is round more, its diameter is 5 - 15 mm, distributary channel walls should be smooth, the shunt side holes require fine tooth is larger than the aperture of used pipe threading pipe and copper seal plug, so as to avoid the plastic melt leakage.
more excellent articles: gate location choice, click directly.
http://www。 csssld。 cn//html/2017/Info_0516/578。 HTML
nantong on suye's official website: http://www. csssld。 Cn / /
more wonderful articles, immediately search: changshu da plastic products factory smoothly
multi-cavity adiabatic flow channel is also called adiabatic distributary channel, direct gate type and main point gate type two kinds. In order to make the flow of internal plastic melt adiabatic effect, the cross section shape use circular and designed to be more considerable. The general 16 and distributary channel diameter Within 32 mm, molding cycle long take larger value, instead of small value, the biggest can reach more than 70 mm. On the mold design, general would add a shunt but. In order to reduce shunt but on the mold cavity part of the heat transfer area, the shunt but in contact with the cavity plate fixed model to open a few grooves.
heat flow but the hole is drilled, insert hole tubular heater, make the flow passage of the plastic in the process of work always stay molten state. Heat flow but use of insulation materials or use of the rest of the air gap and mold heat insulation. External heating type multi-cavity heat flow can be divided into the mainstream type and point gate mouth two kinds, is the point that are widely used in the water the mouth. In order to prevent curing gate in injection molding production, must be insulated gate parts.
heat flow refers to the port within or near the port of set up the heater, using the method of heating injection molding machine between the nozzle and sprue gating system in high temperature condition, let the gating system of plastic has been in the molten state in molding process, ensure the smooth process of injection molding. Heat runner injection mold as adiabatic passage before use or not use must be removed after coagulation in distributary channel, only the gating system heating before driving to the regulation of temperature, condensation in distributary channel will melt, injection molding work can begin. Heating runner gating system in the form of many, generally can be divided into single cavity heating runner and cavity heat flow.
extended nozzle is one of the most Jane single cavity heating passage, it is the common injection molding machine nozzle extension after direct contact with mold gate on the part of a nozzle, the nozzle itself is equipped with heaters, point gate feeding cavity used. In order to avoid the nozzle of too much heat to the low temperature of cavity template, make temperature is difficult to control, effective heat insulation measures should be taken, the commonly used method with a plastic insulation and air adiabatic method.
well type nozzle is one of the most simple adiabatic flow channel, also known as adiabatic mainstream way, suitable for single cavity mould. This form of adiabatic passage between the entrance of the injection molding machine nozzle and mould with a sprue cup, cup outside the air-gap adiabatic, cup with cross section larger storage materials well. In the process of injection molding processing, contact with the wall of the melt quickly solidify and form a thermal barrier, make keep good flow state is located in the center of the melt through point gate mold filling.
according to the distribution of different heating method, multi-cavity heat flow can be divided into external heating and inner heating type. External heating type multi-cavity injection mold has a common characteristic of the heat flow path, namely the mould must be equipped with a heated by heater heat flow but, in the form of heat flow but according to the number of cavity and arrangement, can be a rectangle, or X. Mainstream way and distributary channel cross section is round more, its diameter is 5 - 15 mm, distributary channel walls should be smooth, the shunt side holes require fine tooth is larger than the aperture of used pipe threading pipe and copper seal plug, so as to avoid the plastic melt leakage.
more excellent articles: gate location choice, click directly.
http://www。 csssld。 cn//html/2017/Info_0516/578。 HTML
nantong on suye's official website: http://www. csssld。 Cn / /
more wonderful articles, immediately search: changshu da plastic products factory smoothly
Custom message
