Hollow board turnover box how to cleaning and disinfection

Week of hollow plate loading is clean, we should how to operate? The problem is that we use hollow board week in packing, will certainly encounter problems, must be solved, we can successfully use corrugated board boxes. The following chongda plastic belt everyone understand the specific content.

hollow plate

weeks loading is clean, mainly in the general production area between the container with a clean, clean area. Clean on the corrugated board box, used to clean containers, latex gloves, cloth, and brushes, etc. Cleaning sequence is from outside introversion, from down, and the first corner after the plane.




hollow board weeks the cleaning and disinfection method using the

( 1) Will stay clean between turnover box into the container with a clean inside, then put the dishcloth on cleaner, cleaning at the bottom of the hollow plate box handle, edges and corners, and these areas, such as to clean, no stains.

　　( 2) The dishcloth on cleaner, by outside introversion, down by order, clean the flat part of the corrugated board box, to clean, no dirty

( 3) Clean water will be hollow crate three times, the turnover box into the water, probably around submerged 3 cm, then use clean cloth,. Placed in a container with a clean room, after natural drying.

　　( 4) Generally were disinfected by wiping method, the use of disinfectants.


　　( 5) Week of corrugated board packing after disinfection, placed in a container with a clean, natural drying, and to fill in the cleaning and disinfection of the date and the period of validity.